Introduction

Wera Torque Wrench Kit 1/4″ Drive 2-12 Nm Safe Torque A 1 SHK Set 1 20 Pieces TX Hex 5.5-13mm Sockets

For operations in plumbing, heating and air conditioning, especially for installing shower cubicles and for assembly and maintenance of gas boilers and condensing boilers

Safe-Torque torque wrench with slip-over release mechanism – the set torque can never be overtightened

Torque Lock function: The torque function can be deactivated and the tool can then be used as a standard ratchet with high loosening moments and for applications with defined angles of rotation

For controlled clockwise and counterclockwise torque operation – tightening and loosening with or without torque

Easy setting and saving of the desired torque value with audible and tactile clicks when reaching the scale values

After the target torque has been reached, the release angle is only 30

20-piece set in a robust textile box, especially for HVAC applications. One Safe-Torque A 1 torque wrench with 1/4″ square head drive, 2-12 Nm, with slide-over mechanism. Once the set torque has been reached, the tool cannot be overtightened, so that excessive torque cannot be applied. Setting range of 2 to 12 Nm for controlled clockwise and counterclockwise torque operation. Easy setting and saving of the default value: The audible and tactile clicks on reaching the scale values facilitate the safe setting of the desired torque value. With Torque Lock function for use as a standard ratchet without torque function and thus also usable for applications with angles of rotation. Max. breaking torque of the ” square head as per DIN 3122. The return angle of only 5 allows the ratchet to be used even in confined spaces. Included are: Safe-Torque A 1 torque wrench, 1/4″ square head, 2-12 Nm, 8 sockets with 1/4″ drive, 9 bit sockets (hexagonal socket, TORX) with 1/4″ drive, one short extension.

Contents:

• 1x Safe-Torque A 1 torque wrench with 1/4″ square head drive, 2-12 Nm: 1/4″ x 2-12 Nm
• 8x 8790 HMA Zyklop 1/4″ socket: 6×23 mm, 7×23 mm, 8×23 mm, 10×23 mm, 12×23 mm, 13×23 mm, 5.5×23 mm, 11×23 mm
• 4x 8767 A HF TORX Zyklop bit socket with holding function, 1/4″ drive: TX 15×28 mm, TX 20×28 mm, TX 25×28 mm, TX 30×28 mm
• 5x 8740 A HF Zyklop bit socket with holding function, 1/4″ drive: 3×28 mm, 4×28 mm, 5×28 mm, 6×28 mm, 8×28 mm
• 1x Belt A (textile belt), 9 location, unloaded: 39 x 238 mm
• 1x 8794 SA Zyklop extension with free-turning sleeve, short, 1/4″: 1/4″ x 75 mm
• 1x Hook and Loop Fastener Strip 240: 50 x 240 mm